Printed reflective tape

Printing is generally used on advertising-grade reflective tapes. Advertising-grade reflective tapes use high-refractive glass bead reflective units, and the substrate is PET. In fact, in addition to printing, there are many processing methods for reflective tape, such as engraving, etc. These processing methods have their own advantages. Today we will briefly understand the two types of printing and engraving.

There is a kind of water-based PET ink, which is specially developed for PET sheet. It has good performance and good adhesion. Before printing, it needs to be diluted with appropriate pure water and stirred, and then printed with a water-based special printing screen. Kunshan Yuhuan Package Materials Co., Ltd. mostly uses this method. Water-based inks have the advantages of environmentally friendly solvent inks, which can achieve outdoor durability and versatility, as well as environmental advantages. However, the viscosity reduction speed of water-based ink is relatively fast, so it is necessary to add thinner carefully to prevent affecting the printing effect. Then there is engraving. Nowadays, engraving methods are rarely used, because if you use more colors, you need to reverse copy and engrave multiple times. After that, it is necessary to manually paste on the bottom plate according to the position bit by bit, which requires many and complicated procedures and high labor costs. The printing is different. You can directly print the required text and photos on the reflective tape on the computer, which is very simple and convenient, saves a lot of time.

The above is a brief introduction about reflective tape printing and engraving. If you have any questions, you can click on the contact information below to consult us.

Contact: lulu Email:lulu@yhtape.com