How to install butyl tape?

Butyl tape is based on butyl rubber and other materials. After modern technology, it has good self-adhesiveness, weather resistance and water resistance. It is widely used in subway tunnel projects, municipal pipeline construction and shipbuilding industries. With the development of China's modern industry, its demand is increasingly apparent. The development and technological improvement of butyl tape in China have achieved remarkable results. In the exploration of raw materials and production processes, there is a lot of room for development of butyl tape, and the discovery of new properties arouses the enthusiasm of the younger generation. Due to the excellent adhesion and non-curing properties of the material itself, it has a good followability to the color steel plate and can withstand a certain displacement of the steel plate. Therefore, it has good waterproof performance and is easy to use. It is widely used in roof waterproofing, underground waterproofing, structural construction joint waterproofing, lap sealing of polymer waterproofing membranes, and sealing and waterproofing treatment of municipal engineering subway tunnel structural joints.

Wide application range of butyl tape:

It has a wide range of applications, and it can be attached wherever it is needed, and it has adhesion to the surface of any article. As long as the bonding surface is kept dry and clean, it has very beneficial bonding properties to cement, metal, wood, coil, plastic, etc. No need to use any tools, just paste it directly! !

Preparation before installation of butyl tape:

(1) The bonding floor is clean, free of greasy ash and moisture.

(2) To ensure that the compressive strength of the adhesive is 5°C higher than the ground temperature, a special low-temperature natural environment can be specially created.

(3) When using, uncover the tape paper for a round before use.

(4) Do not use it at the same time with waterproof materials containing organic substances such as benzene, toluene, methanol, ethylene, and silica gel.

The application of butyl waterproof tape has clear regulations.

How to install butyl tape:

(1) The construction is convenient and quick. Using butyl tape construction, it should be bonded in place at one time, and the surface of the rural grassroots level is clean.

Engineering construction has wider requirements for natural conditions. Within the range of -15°C-45°C, and the ambient humidity is below 80°C, normal engineering construction can be carried out, and it has strong adaptability to the natural environment.

(2) The repair process is simple and reliable. Single and double-sided tape only needs to be selected at the location of the big leak.

(3) Tear off the isolation film, and when directly pasting it, be sure to press it tightly to make it tight, and there should be no gaps, air bubbles, etc. So as not to affect the use effect.

The above is about the correct use of butyl tape. I hope it can be helpful to everyone. If you have any other questions, click the link below to consult the manufacturer Kunshan Yuhuan, and the professionals will connect with you~

Contact: lulu Email:lulu@yhtape.com