Copyright © 2021 Kunshan Yuhuan Package Materials Co., Ltd. All rights reserved.
Anti slip tape is a special type of adhesive tape that is designed to prevent slips, falls, and accidents. Anti slip tapes create a safe environment for you and your family. Kunshan Yuhuan anti slip tape is strong and durable and has both indoor and outdoor uses. You can use this tape in stairways, ramps, entryways, bathroom floors, fitness equipment, trucks, buses, skateboards, etc., and over a range of surfaces like metal, plastic, concrete, and tile. You can use anti slip tapes on both rough and smooth surfaces. They are resistant to water, oils, and detergents. Anti slip tapes come in a variety of colors, textures, and widths and can adhere to all surfaces.
Some people find that anti slip tape comes off easily; they complain the tape is not sticky or wears off quickly. But these issues usually happen because the tape is not applied correctly. That’s why it’s important to learn how to apply anti slip tape correctly. You can use the following steps to apply anti slip tape on your home:
1.First of all, clean the surface thoroughly. Use an industrial cleaner to remove oil, dirt, and dust from the surface.
2.Next, make sure the surface is completely dry, and there is no residue water or oil.
3.Measure the appropriate length and cut the tape using a pair of scissors.
4.Peel off the protective film.
5.Position the tape and press it into place, pushing from the center out to the edges. This helps to remove air bubbles.
6.Use a rubber roller to remove the air bubbles.
7.To keep the tape in place, heat with a hairdryer, and beat with a rubber hammer, pressing firmly.
You can use the surface immediately after applying the anti slip tape. There is no need to section off your stairway or entryway for a few hours.
Tips to Follow When Applying Anti Slip Tape
-Choose an anti slip tape that suits your purpose. To do this, check its size, texture, appearance, and adhesive force.
-Before applying the anti slip tape, test its adhesivity by just peeling a small section.
-Always make sure the surface is clean and dry before applying the tape.
-Try to keep your fingers off the adhesive when peeling off the backing of the tape.
-If you attach the anti slip tape wrong, you can quickly tear it off and re-attach it in another position.
-When using the hairdryer to heat the surface, make sure to keep the temperature lower than 20℃.
-Make sure to avoid air bubbles or hollowed-out spaces. These can reduce the durability of the tape.
We hope these tips and tricks will help you to apply and use anti slip tape correctly! Applying anti slip tape correctly will help to ensure its longevity and safety.
Contact: lulu Email:lulu@yhtape.com